Isuzu Truck Remote Programming

Know Models: Isuzu N Series NPR Elf 

Starting State:

Key out of ignition

All Doors Closed and unlocked

Complete Step 1-3 within 10 seconds

Step 1: Open Drivers Door

Step 2: Lock and unlock drivers side manual slide 

Step 3: Insert key into ignition

Step 4: Turn Key on then off 2x

Step 5: Remove key from ignition

Step 6: Press the door ajar switch 6x  

Locks will cycle 2x

Step 7: On the remote, press and release lock and unlock buttons together

Step 8: On the same remote press and release lock or unlock button 

Locks will cycle

Close the drivers door to exit programming

Check remotes

To Delete Remotes

Step 1: Open drivers door

Step 2: Lock and unlock drivers side manual slide

Step 3: Insert key into ignition

Step 4: Turn Key on then off 6x

Step 5: Remove key from ignition

Step 6: Press the door ajar switch 7x

Hazards will flash 5x

Close drivers door

All remotes are now cleared