Toyota

View as List Grid

10 Items

per page
Set Descending Direction
  1. Toyota Altezza 5x Central alternative Remote Programme
    Toyota Altezza 5x Central alternative Remote Programme
    Out of stock
    Starting state:

    Key out of ign,
    Drivers door open, interior light on auto

    Step 1: Key in ign and remove
    Step 2:
    Using the central locking switch press lock then unlock 5x

    Step 3: Close then open drivers door

    Step 4:
    Using the central locking switch press lock then unlock 5x

    Step 5:
    Key in ign turn on, off and remove
    Step 6: Locks will cycle

    Step 7:
    On remote press lock and unlock together for 1,5sec, release then lock, then release

    Step 8: Locks will cycle

    Step 9:
    repeat step 10 for any other remotes
    Step 10:
    Open and close drivers door to exit programming mode

    Notes:

    1 button remotes hold button down for 5 seconds release then press & release Learn More
  2. Toyota Camry 1 button Overide Remote Programming
    Toyota Camry 1 button Overide Remote Programming
    Out of stock

    Step 1: Turn ign on for 45min

    Step 2:
    Start vehicle without turning off

    Step 3:
    Will now start without the remote Learn More
  3. Toyota Camry 94-97 1 button Remote Programming
    Toyota Camry 94-97 1 button Remote Programming
    Out of stock
    Step 1:
    Insert existing remote into glove box slot

    Step 2:
    Red light on dash will illuminate

    Step 3: Remove existing remote

    Step 4:
    Within 5 seconds insert new remote

    Step 5: Remove and test

    Notes:

    If all lost leave Key in on position for 40min. Switch straight from on to start. Disables remote immobilizer permanently Learn More
  4. Toyota Celica 00-05 Prius 01-03, Echo 01-05, Rav4 01-05,Avalon 03-05, Vitz 04 Remote Programming
    Toyota Celica 00-05 Prius 01-03, Echo 01-05, Rav4 01-05,Avalon 03-05, Vitz 04 Remote Programming
    Starting state:
    Key out of ign, Drivers door open, interior light on auto
    Step 1: Key in and out of ign 2x

    Step 2:
    Close and open drivers door 2x

    Step 3: Key in and out of ign 1x

    Step 4:
    Close and open drivers door 2x

    Step 5: Close drivers door

    Step 6: Insert key into ign

    Step 7:
    Turn ign from lock to on & back to lock
    1x for Add
    2x for rewrite

    Step 8: Remove key from ign

    Step 9: Locks will cycle

    Step 10:
    On remote press lock and unlock together for 1,5sec, release then lock, then release

    Step 11: Locks will cycle

    Step 12:
    repeat step 10 for any other remotes

    Step 13:
    Open and close drivers door to exit programming mode

    Notes:

    1 button remotes hold button down for 5 seconds release then press & release Learn More
  5. Toyota Corolla Prado 1 button Remote Programming
    Toyota Corolla Prado 1 button Remote Programming
    Out of stock
    Starting state:
    Drivers door open interior light on auto

    Step 1:
    Lock and unlock door with existing remote

    Step 2: Insert Key into Ignition

    Step 3:
    Turn from off to on 20x finishing in the off position

    Step 4: Hazard lights will flash 20x

    Step 5:
    Wait until hazards stop flashing

    Step 6:
    Press button on existing remote

    Step 7: Hazards flash once

    Step 8:
    Repeat 6-7 for subsequent remotes

    Step 9:
    Turn ignition on off 2x to exit

    Notes:
    If no existing remotes, do battery reset on vehicle then to step 2 Learn More
  6. Toyota Estima Corolla Camry Highlander remote Programming
    Toyota Estima Corolla Camry Highlander remote Programming
    Out of stock
    Starting state:
    Key out of ign, Drivers door open, interior light on auto

    Step 1: Key in and out of ign 2x

    Step 2:
    Close and open drivers door 2x

    Step 3: Key in and out of ign 1x

    Step 4:
    Close and open drivers door 2x

    Step 5: Insert key into ign

    Step 6: Close drivers door

    Step 7:
    Turn ign from lock to on & back to lock

    1x for Add

    2x for rewrite

    Step 8: Remove key from ign

    Step 9: Locks will cycle

    Step 10:
    On remote press lock and unlock together for 1,5sec, release then lock, then release

    Step 11: Locks will cycle
    Step 12:
    repeat step 10 for any other remotes

    Step 13:
    Open and close drivers door to exit programming mode

    Notes:
    1 button remotes hold button down for 5 seconds release then press & release
    On Hilux, Key in and out of Ign once at the start Learn More
  7. Toyota Hilux G Reset Remote Programming
    Toyota Hilux G Reset Remote Programming
    Out of stock
    Step 1:
    Put key with new transponder into ignition and turn on

    Step 2:
    Plug the dongle into the OBD port

    Step 3:
    When you hear a continuous beep

    Step 4:
    Remove the key from the ignition

    Step 5: Re insert the key and turn on

    Step 6:
    Dongle will beep  2x and the immobiliser light is solid, the car is in program mode

    Step 7:
    1st key is programmed, remove it and cycle to on any subsequent keys

    Step 8:
    Cycle the last key on - off 5x to exit programming Learn More
  8. Toyota Hilux Landcruiser 1 Button Remote Programming
    Toyota Hilux Landcruiser 1 Button Remote Programming
    Out of stock

    Existing remotes must be re programmed:

    All must be re programmed

    Starting state:

    Drivers door open interior light on auto

    Step 1:
    Lock and unlock door with existing remote

    Step 2: Insert Key into Ignition

    Step 3:
    Turn from acc to on 20x finishing in the acc position
    Step 4: Hazard lights will flash 20x

    Step 5:
    Wait until hazards stop flashing

    Step 6:
    Press button on existing remote

    Step 7: Hazards flash once

    Step 8:
    Repeat 6-7 for subsequent remotes

    Step 9:
    Turn ignition on off 2x to exit

    Notes:

    If no existing remotes,  do battery reset on vehicle then to step 2
    Also try 26x cycling Learn More
  9. Toyota Ist, 02 Landcruiser 5x central Remote Programming
    Toyota Ist, 02 Landcruiser 5x central Remote Programming
    Out of stock
    Starting state:

    Key out of ign, Drivers door open, interior light on auto

    Step 1:
    Key in ign turn on, off and remove

    Step 2:
    Using the central locking switch press lock then unlock 5x

    Step 3: Close then open drivers door

    Step 4:
    Using the central locking switch press lock then unlock 5x

    Step 5:
    Key in ign turn on, off and remove
    Step 6: Locks will cycle

    Step 7:
    On remote press lock and unlock together for 1.5sec, release then lock, then release

    Step 8: Locks will cycle

    Step 9:
    repeat step 7 for any other remotes

    Step 10:
    Open and close drivers door to exit programming mode

    Notes:

    1 button remotes hold button down for 5 seconds release then press & release Learn More
  10. Toyota Orange Dongle Remote Programming
    Toyota Orange Dongle Remote Programming
    Out of stock
    Step 1:
    Insert key into ignition and turn to on position

    Step 2:
    Plug in orange reset tool into OBD

    Step 3:Dongle will beep once.

    Step 4:
    Within 30 seconds it will beep again 3 times

    Step 5:
    Wait approximately 1 minute and it will beep for 5 seconds

    Step 6:
    Car is now in auto registration mode. Immo light will now be on solid.

    Step 7:
    Turn key off and unplug dongle

    Step 8:
    Insert first master into ignition and turn to on position for 5 seconds then turn off and remove.
    Immo light will flash and come back on solid

    Step 9:
    Repeat for a second master key if required. Immo light will flash and come back on solid

    Step 10:
    Only 2 master keys can be enrolled in auto registration mode

    Step 11:
    After you have finished cycling the key/s turn the ignition to quickly on then off five times

    Step 12:
    Once the key is removed, Immo light will now be flashing Learn More
View as List Grid

10 Items

per page
Set Descending Direction
Copyright © TTK Ltd. All rights reserved.