Suzuki

View as List Grid

4 Items

per page
Set Descending Direction
  1. Suzuki Ignis or Chevrolet Cruize Remote Programming
    Suzuki Ignis or Chevrolet Cruize Remote Programming
    Out of stock
    Maximum Number of remotes: 2

    Existing remotes must be re programmed:

    All must be re programmed

    Starting state: Key out of Ignition doors closed interior light on auto

    Step 1: Key into ignition and turn on

    Step 2: Ignition off and remove key

    Step 3:
    Within 20 sec press and release drivers door courtesy light switch 3x
    Step 4: Switch ignition on

    Step 5: Switch ignition off
    Step 6: Remove key
    Step 7: Locks will cycle

    Step 8:
    Press unlock button on remote  (s)

    Step 9:
    Locks should Cycle with each remote Learn More
  2. Suzuki Jimny Remote Programming
    Suzuki Jimny Remote Programming
    Out of stock
    1) Confirm that the vehicle is the following conditions.
    • All doors are closed.
    • Ignition key is out of ignition switch.
    • Driver side door is unlocked.
    2) Disconnect negative (-) cable from battery.
    3) After 30 seconds, perform the following procedure within 60
    seconds.
    a) Connect negative (-) cable to battery.
    b) Operate driver side door knob switch from lock to unlock 2x
    c) Push “LOCK” button on transmitter and confirm that are
    operated from lock to unlock.
    d) Push driver side door knob switch to lock position.
    e) Push “LOCK” button on transmitter twice and confirm that
    all doors are operated from unlock to lock. With this, code
    registration is completed.

    Learn More
  3. Suzuki Swift Grand Vitara Remote Programming
    Suzuki Swift Grand Vitara Remote Programming
    Out of stock
    Maximum Number of remotes: 3

    Existing remotes must be re programmed:

    Drops out oldest

    Starting state:

    Doors closed key out of Ignition interior light on auto

    Step 1: Open drivers door

    Step 2: Key in ignition and turn on
    Step 3: Remove key from ign

    Step 4:
    Press and release the driver's door position switch 3x

    Step 5: Turn Ignition on

    Step 6:
    Turn Ignition off and remove key

    Step 7: Locks will cycle

    Step 8: Press unlock

    Step 9: Locks will cycle

    Step 10:
    Close and then open the drivers door to exit programming

    Step 11:
    Repeat whole process to add a 2nd remote

    Notes:

    Max 10 seconds between each step Learn More
  4. Suzuki Sx4 Swift Prox Remote Programming
    Suzuki Sx4 Swift Prox Remote Programming
    Out of stock
    Maximum Number of remotes: 2

    Existing remotes must be re programmed:
    All must be re programmed

    Starting state:

    Doors closed & unlocked, key out of Ignition interior light on auto

    Step 1: Key into ignition

    Step 2:
    Lock then unlock doors with central locking switch 3x

    Step 3:
    Lock door with central locking switch

    Step 4:
    Remove key then reinsert key to ignition 4x

    Step 5:
    Start the engine and wait 3 seconds

    Step 6: Turn Ignition off

    Step 7:
    Buzzer will sound and Locks cycle

    Step 8: Press lock or unlock on prox

    Step 9: Locks will cycle

    Step 10:
    Repeat step 8 for subsequent prox keys

    Step 11:
    Remove key to exit programming

    Notes:

    If it doesn't work, use manual locking slide instead of central locking switch.
    Step 2 fast then pause before step 3 Learn More
View as List Grid

4 Items

per page
Set Descending Direction
Copyright © TTK Ltd. All rights reserved.